BenelliDiscontinued · launched 2015motorcycleSports naked300 cc

Benelli TNT 300

The Benelli TNT 300 is a discontinued 300 cc liquid-cooled motorcycle with a 6-speed gearbox. BikeDekho lists 38.26 PS @ 11500 rpm maximum power, 26.5 Nm @ 10000 rpm maximum torque, dual-channel ABS, disc brakes at both ends, 120/70-17 front and 160/60-17 rear tyres, a 16 litre fuel tank and a 196 kg kerb weight.

Engine
300 cc
Max power
38.26 PS @ 11500 rpm
Max torque
26.5 Nm @ 10000 rpm
Fuel tank
16 Litres
Kerb weight
196 kg

About the Benelli TNT 300

Overview

The Benelli TNT 300 is a sports naked motorcycle from Benelli. It was launched in 2015 and has since been discontinued. Mechiee still services it at your doorstep. Naked and roadster bikes pair a lively engine with an upright riding position and little or no fairing, which makes them easy to live with every day. With a 300 cc engine it sits in the 250–450 cc class.

Engine and performance

Power comes from a 300 cc twin-cylinder liquid-cooled fuel-injected engine that makes 38.26 PS at 11,500 rpm and 26.5 Nm of torque at 10,000 rpm. Peak torque comes high up, at 10,000 rpm, so it rewards revving. Its bore is wider than its stroke (65 mm x 45.2 mm), a short-stroke layout that generally favours higher revs. Divide power by kerb weight and it has about 195 PS per tonne; by that measure, it is lively, with easy overtakes and relaxed highway speeds. The claimed top speed is 154 km/h. It has electric start.

Gearbox

It has a 6-speed manual gearbox, and a chain carries drive to the rear wheel. It uses a wet multi-plate clutch.

Chassis, brakes and tyres

It is built around a steel trellis frame. Suspension is by inverted telescopic forks at the front and Off-set rear monoshock at the rear. Braking is by a 260 mm disc at the front and a 240 mm disc at the rear, with dual-channel ABS. ABS on both wheels keeps either tyre from locking under hard braking. It rides on 17-inch alloy wheels with tubeless tyres — 120/70-17 at the front and 160/60-17 at the rear.

Size, comfort and range

The seat is 795 mm off the ground, which is about average and suits most riders. It weighs 196 kg ready to ride, which is on the heavy side, so moving it by hand takes some effort. Ground clearance is 160 mm — enough for most speed breakers. It is 2,130 mm long, with 1,410 mm between the axles. It carries 16 L of fuel.

Features and equipment

Equipment includes an analogue and digital instrument console, a halogen headlamp and distance-to-empty readout. Safety equipment includes low fuel indicator.

Owning one

The manufacturer's warranty is 2 years or 24,000 km. For the Benelli TNT 300, Mechiee offers a fixed ₹6,999 doorstep service.

Who it suits

It is best suited to riders who want performance with an upright, everyday-friendly posture.

Care notes for this model

Its chain drive needs regular cleaning, lubrication and slack adjustment.

Benelli TNT 300 specifications

These figures come from a single publication (BikeDekho) and have not been confirmed against the manufacturer. The model is discontinued. Exact values can differ slightly by variant and model year.

Engine & performance

Displacement
300 cc
Configuration
In-line, 2 cylinder, 4-stroke, liquid-cooled, 8 valves, DOHC
Cooling
Liquid Cooled
Fuel system
Fuel Injection
Ignition
Digital
Starting
Self Start Only
Maximum power
38.26 PS @ 11500 rpm
Maximum torque
26.5 Nm @ 10000 rpm
Top speed
154 kmph
Transmission
Manual
Gears
6-speed
Clutch
Wet, Multi-Plate
Final drive
Chain Drive
Bore x stroke
65 mm x 45.2 mm
Compression ratio
12:1
Emission norm
bs4
Cylinders
2
Valves per cylinder
4

Dimensions & capacity

Length
2130 mm
Width
800 mm
Height
1120 mm
Wheelbase
1410 mm
Ground clearance
160 mm
Seat height
795 mm
Kerb weight
196 kg
Fuel tank
16 Litres
Fuel reserve
3 L

Brakes, suspension & tyres

Front brake
Disc, 260 mm
Rear brake
Disc, 240 mm
Braking system
Dual Channel ABS
Front suspension
Inverted telescopic forks
Rear suspension
Off-set rear monoshock
Front tyre
120/70-17
Rear tyre
160/60-17
Wheels
Alloy
Tyre type
Tubeless

Chassis & frame

Frame type
Steel trellis

Electricals

Headlamp
Halogen
Instrument console
Analogue and Digital
Tail lamp
LED

Features & technology

  • Distance-to-empty readout

Safety

  • Dual Channel ABS
  • Low fuel indicator

Sources: BikeDekho, Bikesmedia

Specifications last checked:

Spot an error? Tell us

Owning the Benelli TNT 300

  • Manufacturer warranty

    2 Years or 24,000 Km

    Terms and conditions apply.

  • Mechiee doorstep service

    ₹6,999

    Mechiee's fixed doorstep service price for this model.

Maintaining the Benelli TNT 300

  • Routine servicing

    Follow the schedule in the owner's manual for your exact variant and year. A regular service is the cheapest way to catch small problems before they become expensive ones.

  • Engine oil & filter

    Engine oil is the single most important consumable to keep fresh. Top up between services if the level drops, and change it on schedule.

  • Brake inspection

    With Disc, 260 mm and Disc, 240 mm brakes, check pad or shoe wear, lever and pedal free play, and braking feel at every service.

  • Chain cleaning & lubrication

    A clean, correctly tensioned and lubricated chain lasts longer and wastes less power. Check slack regularly, especially after riding in rain or dust.

  • Coolant & cooling system

    A liquid-cooled engine relies on coolant. Check the level and look over hoses and the radiator for leaks or damage, and replace coolant as the owner's manual directs.

  • Air filter & spark plug

    A clogged air filter or worn spark plug shows up as hard starting, weak throttle response and poorer fuel economy. Both are checked at a regular service and replaced when worn.

  • Disc brake fluid

    Brake fluid absorbs moisture over time, which lowers its boiling point. Have its level and condition checked and change it on the interval in the owner's manual.

  • Tyre inspection

    This bike runs 120/70-17 / 160/60-17 tyres. Check pressure, tread depth and sidewalls, and replace tyres that are worn or cracked.

  • Battery & electricals

    Weak starting, dim lights or a flickering console are early signs the battery or charging system needs a look.

Mechiee service

Looking for service for your Benelli TNT 300?

Book a verified Mechiee mechanic, track them live, and keep a permanent record of every job on your bike.

Doorstep service₹6,999

Compare with similar Benelli bikes

Manufacturer figures for each bike. A dash means the value is not published in our sources.

SpecificationBenelli TNT 300Benelli TNT 25Benelli TNT 600iBenelli 302S
Engine300 cc249 cc600 cc300 cc
Max power38.26 PS @ 11500 rpm28.16 bhp @ 9,800 rpm85.07 PS @ 11500 rpm30.06 PS@ 11000 rpm
Max torque26.5 Nm @ 10000 rpm21.61 Nm @ 8,000 rpm54.6 Nm @ 10500 rpm25.6 Nm @ 9750 rpm
Gears6-speed6-speed6-speed6-speed
Kerb weight196 kg159 kg231 kg209 kg
Fuel tank16 Litres17 Litres15 Litres14 L
Front brakeDisc, 260 mmDiscDisc, 320 mmDisc, 260 mm
Rear brakeDisc, 240 mmDiscDisc, 260 mmDisc, 240 mm

Benelli TNT 300 specs explained

What the technical terms on this page mean.

ABS
Anti-lock braking system. It stops a wheel locking up during hard braking so the rider can keep steering. A single-channel system works on one wheel, usually the front; a dual-channel system works on both.
OHC / SOHC / DOHC
How the engine's valves are operated. OHC and SOHC mean one overhead camshaft; DOHC means two, which usually allows higher revs and more power from the same size.
Fuel injection
Petrol is delivered by an electronically controlled injector instead of a carburettor, which helps with easy starting and steady fuel economy.
Liquid cooling
Coolant circulates through the engine and a radiator, keeping temperatures steadier than air alone, especially in traffic or under load.
Monoshock
A single rear shock absorber that does the work of a pair.
Trellis frame
A frame built from tubes arranged in triangles, which gives strength without much weight.
Tubeless tyres
Tyres with no inner tube. A small puncture usually loses air slowly, which makes roadside repair easier.
Kerb weight
The weight of the bike ready to ride, with its fluids and fuel, but without a rider or luggage.
Bore x stroke
The cylinder's width and the piston's travel. A larger bore relative to stroke tends to favour revs; a longer stroke tends to favour low-speed pull.
Compression ratio
How much the fuel-air mixture is squeezed before it is ignited. It is one of the factors behind an engine's efficiency and power.

Frequently Asked Questions

The Benelli TNT 300 has a 300 cc engine, described as in-line, 2 cylinder, 4-stroke, liquid-cooled, 8 valves, dohc.

The Benelli TNT 300 is rated at 38.26 PS @ 11500 rpm maximum power and 26.5 Nm @ 10000 rpm maximum torque.

The Benelli TNT 300 has Disc, 260 mm at the front and Disc, 240 mm at the rear, with Dual Channel ABS.

The Benelli TNT 300 runs 120/70-17 at the front and 160/60-17 at the rear on alloy wheels.

Follow the service schedule in the owner's manual for your exact variant and year. Between services, keep an eye on engine oil, chain, tyres and battery. With Disc, 260 mm and Disc, 240 mm brakes, brake wear and adjustment are worth checking at every visit.

The manufacturer states a warranty of 2 Years or 24,000 Km. Terms and conditions apply.

No. The Benelli TNT 300 has been discontinued. Mechiee still lists doorstep servicing for it.

The Benelli TNT 300 was launched in 2015.

Ready When You Are

Book service for your Benelli TNT 300 today

Verified mechanics, live tracking, and a digital record of every job — start to finish.

Book Service